Domakihub Organize Home Cables and Cords in 5 Simple Steps
Tame cable chaos behind TVs, desks, and routers — without drilling a single hole.
Reviewed by Domakihub home & decor pros · 2026-06-23 · 5 min read
Cable clutter is one of the fastest ways to make a living room or home office feel messy, and in Greek holiday rentals and hotels it can actively put guests off. The video above walks through the core techniques visually; this guide breaks them into a clear sequence you can follow room by room. Whether you are sorting out a permanent home in Athens or refreshing a seasonal villa before peak bookings, these steps keep things tidy and landlord-safe.
Why Cable Management Matters in Rentals and Hotels
In a short-term rental or hotel room, the first thing many guests notice after setting down their bags is whether the space feels controlled and clean. A tangle of charger cables behind the television or a nest of router wires on the floor signals poor upkeep, regardless of how well the rest of the property is presented.
Organised cabling also has a practical benefit: it reduces wear on connectors, prevents accidental disconnections, and makes it far easier to troubleshoot when something stops working. For property managers juggling multiple units, a consistent cable system cuts the time spent untangling problems between guest stays.
Choosing the Right Tools for a No-Drill Approach
Many Greek rental contracts — and most holiday-property leases — prohibit tenants and managers from drilling into walls or making permanent alterations. Fortunately, the cable-management market has matured to the point where adhesive-backed clips, peel-and-stick cable raceways, and removable hook-and-loop fasteners can handle almost any domestic wiring scenario without leaving a mark.
Before buying anything, do a quick inventory: count how many cables run to each area (TV unit, desk, router shelf), measure the longest visible run, and note whether the cables will be visible to guests or hidden behind furniture. That inventory drives the product choice and keeps costs down.
5 Steps to Tidy Every Cable in the Room
- 1
Label everything before you touch a single cable
Cut small strips of masking tape, fold each one around its cable, and write what it powers — 'TV power', 'router', 'lamp', and so on. Doing this first means you can unplug and move cables confidently without creating a guessing game later. In a rental property, clear labelling also helps cleaners and maintenance staff avoid accidentally pulling the wrong lead.
- 2
Bundle cables that travel the same route
Group cables heading in the same direction and secure them together with reusable hook-and-loop cable ties rather than single-use zip ties. Hook-and-loop ties let you add or remove a cable without cutting anything, which matters when a guest brings their own device or a technician swaps out the router. Keep power cables and data cables in separate bundles where possible, as running them together can introduce minor interference on audio or network lines.
- 3
Route bundles along skirting boards using adhesive clips
Peel-and-stick cable clips (available in any Greek hardware shop or online) hold bundles flush against skirting boards or the back edge of a desk. Press the surface clean and dry before applying, and hold each clip in place for thirty seconds to activate the adhesive properly. Space clips roughly every twenty centimetres on a horizontal run and every fifteen centimetres on a vertical one to stop the bundle sagging. If you need to remove them later, a little isopropyl alcohol dissolves the adhesive residue cleanly.
- 4
Hide the bulk inside a cable management box or raceway
Power strips and the cluster of adapters behind a TV or desk are the hardest part of any cable run to neaten with clips alone. A cable management box — a simple lidded container with entry and exit slots — drops over the power strip and conceals the plug pile entirely. For longer visible runs along a wall, a paintable PVC raceway channel gives a near-invisible finish. Both solutions are removable and leave no permanent marks, making them suitable for rental properties.
- 5
Dress the final result and do a guest-eye check
Once everything is clipped or channelled, step back and look at the space from the angle a guest or visitor would see it — typically the doorway and any seating area. Adjust any clips that have shifted, tuck in any loose tails, and confirm that nothing is stretched tight or bent at a sharp angle, both of which shorten cable life. Take a quick photo of the finished setup so you have a reference when the space is reset between guests or after any maintenance visit.
Rather have a pro handle it?
Get a vetted handyman pro in your city — one number, booked in EN/EL/DE.
FAQ
- Can I use cable raceways on walls without losing my rental deposit in Greece?
- Yes. Adhesive-backed PVC raceways are designed to be removed cleanly, and most leave no residue on painted plaster if you follow the manufacturer's removal instructions (usually slow peeling at a low angle, sometimes with a hairdryer to soften the adhesive). Always test a small section in an inconspicuous spot first and confirm with your landlord if in doubt.
- How do I stop cables from slipping out of adhesive clips over time?
- The most common reason clips fail is surface contamination at the time of installation. Clean the mounting surface with isopropyl alcohol, let it dry fully, then press and hold each clip for at least thirty seconds. In warm Greek summers, choose clips rated for higher temperatures — many budget clips use adhesive that softens above 40 °C and lets go in a south-facing room.
- What is the quickest cable fix for a holiday rental between guest changeovers?
- Keep a small kit in each property: a roll of hook-and-loop cable ties, a handful of adhesive clips, and a cable management box sized to fit the main TV power strip. After each checkout, a ten-minute tidy using this kit is usually enough to restore order. Photographing the 'correct' cable setup during the initial installation gives your cleaner or manager a reference to match.